What are the easiest curtains to make?
The cheapest (and easiest) curtains to make are tab top. The panels aren’t as gathered so they use up less fabric than a pair made with header tape.
How do you measure for homemade curtains?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How do you make easy unlined curtains?
Making Unlined Curtains
- Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances. …
- Turn in a double 2.5cm (1″) hem at each side and pin.
- Turn up a double 7.5cm (3″) hem at the lower edge and pin.
- Mitre both bottom corners.
How difficult is it to make curtains?
Making curtains is easy, but only if you know the basics
Curtains are almost all straight sewing, making them an easy project for beginners. That said, there are still some basics to master before embarking on sewing curtains for the first time.
How do you make curtains without sewing?
Rings with clips are an amazingly chic and ultra-easy way to hang curtains, draperies, and valances without all the fuss of sewing. They slip right over a rod and slide back and forth easily, attaching to your fabric with small clips that hang off the rings.
How much material is needed for curtains?
Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.
How do you make two sided curtains?
Place a piece of one fabric type right-side up. Place a piece of the second fabric type right-side down on top of it, matching the raw edges. Pin the pieces together. Sew the top edge, using a 1/2-inch seam allowance.
What length is cloth is needed to curtain the window?
Many windows need more fullness than one length of fabric will achieve. A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not.
Which is the most appropriate tool to measure the length of a curtain?
For curtains, the measuring tool you use is crucial. You’ll get the most accurate measurement with a retractable metal tape measure. The kind the carpenters use. The retractable metal tape measurer is preferable to the sewer’s cloth tape because it will remain flat and tight to the surface being measured.
When making curtains How wide should they be?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.