Why won’t my Kenmore sewing machine pick up the bobbin thread?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Make sure the presser foot is up when seating the thread through the upper tension.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
Why won’t my Kenmore sewing machine zigzag?
Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.
Why won’t my Kenmore sewing machine work?
Try unplugging the machine for an hour or so and letting it reset. If that doesn’t work, take the bobbin case apart and cleaning underneath it. That machine is designed to stop working of there is anything that jambs or gets stuck so as not to damage the machine.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.