Stay stitching is a stitch line done as preparation before you start constructing your garment. Its purpose is to prevent a certain area from stretching once you start putting the garment or item together. Stay stitching is done when your pattern piece is still flat and it’s often one of the first things you do.
Is Stay stitching the same as basting?
No. Stay stitching is not the same as basting. When we baste we are using a longer length stitch, called a basting stitch, to connect two pieces of fabric together and this thread is then removed when we have sewn our final seams. Staystitching is done to individual pieces and the stitches are left in place afterwards.
How big is a stay stitch?
Staystitches are regular-length stitches (2 mm) that are not removed like basting or ease stitches. A row of staystitching should be sewn about 1/16 inch to 1/8 inch outside the seamline, within the seam allowance.
Is Stay stitching necessary?
The purpose of staystitching is to maintain those grainlines. That’s extra important with curved pieces like necklines and armholes that are cut on the bias (off-grain). Because these pieces are stretchier, their fibers are more likely to get distorted during handling and sewing.
Why is it necessary to stay stitch the waistline?
It is sewn to stabilize the fabric and prevent it from becoming stretched or distorted. Though you may be tempted to skip this step, it’s very important and will ensure that your handmade clothing drapes properly.
How far in do you stay stitch?
The standard is to sew 1/8″ away from the sewing line, so if your seam allowance is 5/8″, then stitch 1/2″ away from the raw edge. It’s important to staystitch soon after cutting out your fabric.
Do you stay stitch stretch fabric?
It is usually advised to stay stitch the neckline, waistline and sometimes the back seam of a garment. … On stretchy, slinky fabrics like lightweight silk, viscose or viscose jersey you can further prevent stetching and distortion edges by using fusible stay tape on curved necklines and shoulder seams.
How do you Staystitch by hand?
Simple Points to Remember When Stay stitching
- Always stay stitch immediately after cutting out your fabric.
- Sew with a small tight stitch (2.0).
- Make sure you stitch from the edge to the center on each side so you keep the sides evenly matched and don’t pull the fabric at all.
- No need to unpick!
What is stay tape?
What is stay tape? Basically it stabilises seams, stopping knits and curved, woven, seams from stretching. Mostly used for necklines, armholes and shoulder seams, stay tape is so useful. Usually it is enough to hold the seam length permanently but some of this will depend on placement of seam tape.
Is there a need to Staystitch straight edge?
Where should you staystitch? To be safe, staystitch any curved or bias edge that might potentially stretch during the sewing process. This includes necklines, contoured waistlines, armscyes, sleeve caps, and even shoulder seams. It’s done within the seam allowance, so it won’t show.
What does Understitching mean in sewing?
An understitch is sewn along the edge of the lining or facing nearest the armhole or neckline and works to secure the lining or facing to the seam allowances which in turn keeps everything neatly tucked inside the garment instead of poking out and being visible from the right side.