You asked: Which side does the bobbin thread show?

You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. The reason you want to use a lightweight thread is to avoid too much bulk on the back of the item.

What direction should bobbin thread go?

Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull the thread through the slot (A) and then to the left.

When can you see bobbin thread on top?

In general, if you are seeing bobbin thread in your top stitching, the bobbin tension is too loose. This little screw on your bobbin housing allows you to adjust your bobbin tension.

Where do you put a threaded bobbin and where does the thread from the bobbin go when the machine is in use?

Insert bobbin counterclockwise

Place your bobbin inside. Make sure the thread unwinds to the left (counterclockwise direction). Guide the thread through the slit in the needle plate cover. This is important because it makes the thread enter the ‘tension spring’ of the bobbin case.

IT IS INTERESTING:  What thread do you use for long stitch?

Why is my bottom thread bunching up?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

How do you tell if your bobbin tension is off?

The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.

Why is my bobbin thread not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.

Why is only my bobbin thread showing?

– If the upper tension is too tight the bobbin thread with be showing on the top side of the material. Press the minus key on the screen to loosen the tension. – If the upper tension is too loose most of the upper thread will be showing on the bottom the material.

Why is my bobbin thread showing on top Janome?

When you see the bobbin thread come through to the top, this means that there is no tension on the bobbin thread to hold it back. Try removing and reinserting/rethreading the bobbin in the bobbin case. … Improper bobbins can be too tight or loose in the bobbin case.

IT IS INTERESTING:  What is a stitch multiple?

What tension should my brother sewing machine be on?

The normal tension setting is 4.0. The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and the bobbin thread should be visible from the wrong side of the fabric.

Where is the bobbin case located?

Front loading bobbin cases are removed and inserted on the side of the sewing machine facing the user. These are the most common on modern machines with a removable bobbin.