How do you poke holes in beads?

How do you drill holes in polymer clay beads?

Bead pins are thin, stiff, pointed wires which easily pierce raw polymer clay beads. Bake the beads on the pins, removing the pins after baking. If you need a larger hole, just enlarge the hole with a drill after baking. The small hole created by the bead pins makes it easy to drill straight.

How do you use bead piercing pins?

Line up the rolled beads with the pin path holes on the Bead Roller to pierce beads. Leave pin in the pierced bead, remove from roller tray, place pin with bead into one of the slots on the Bead Baking Rack. Remove pin after baking.

How do you drill big holes in pearls?

However, if you’d like to use needle and thread again for your next design, use a pearl reamer to make the drill holes larger. These handy tools come with a very fine, tapered, corkscrew-like tip. Just pass the tip through the drill hole, hold onto the pearl and slide it back and forth to enlarge and smooth the hole.

How do you make the hole bigger in gem beads?

How to Make a Bead Hole Bigger

  1. Grip the bead with tweezers. …
  2. Dip natural beads, such as pearls and beads made from precious stones, in a bowl of water. …
  3. Insert the narrow tip of the bead reamer into the hole on the bead. …
  4. Continue to rotate the reamer until you have reached the desired hole size.
IT IS INTERESTING:  Your question: What is the meaning of open end yarn?

How do you drill amber beads?

Be aware that amber Gemstone is soft and cracks easily. Drill slowly and don’t apply the maximum amount of pressure. Try to drill each piece so the holes line up as closely as possible. If possible, practice drilling on a chunk or two before drilling the best pieces.

What drill do you use for polymer clay?

Micro Drill

You can use these to drill holes, by hand, through cured polymer clay. It’s perfect for enlarging the holes left from using bead pins. Micro-drills typically come with an assortment of tiny bits that are smaller than what you will find in your typical hardware store.

Do you make holes in polymer clay before or after baking?

A much cleaner and better looking hole can be made after the polymer clay has been baked, using a drill bit. Drilling in baked polymer clay is super easy to do. By holding off on adding holes to your polymer clay beads until after they are baked… gives you more options.

What is a bead reamer?

A bead reamer is a pointed, round needle file that is used to either smooth the edges of the drill-hole in a bead, or to enlarge or straighten the hole itself. … Finally, a bead reamer helps the designer achieve smooth centers and larger bead holes without damaging the beads.