Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Why won’t my needle catch the bobbin thread?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. The reason you want to use a lightweight thread is to avoid too much bulk on the back of the item.
What holds the needle in place on a sewing machine?
Needle clamp-holds the needle in place. A broken needle can easily be replaced. Needle plate- fits around the feed dogs; the needle goes through it; it has a seam guide on it.
Why is my top thread wrapping around the bobbin?
Some of the main reasons your thread could be wrapping around the bobbin include lack of proper maintenance, causing a buildup of lint and debris, improperly threading the machine, using the wrong needle, or using a different thread weight that is not recommended.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.