An overlock is a kind of stitch that sews over the edge of one or two pieces of cloth for edging, hemming, or seaming. Usually an overlock sewing machine will cut the edges of the cloth as they are fed through (such machines being called sergers in North America), though some are made without cutters.
When should you overlock seams?
When to Use an Overlock Stitch
Some seams or fabrics benefit from being pressed open after being sewn in order to reduce bulk. In these cases, overlocking raw edges before construction may be the best bet.
What is the purpose of a French seam?
A French seam encloses the seam allowance on the inside of a sewn item, so no raw edge is visible. This eliminates the need for another form of seam finish. It’s used most commonly on sheer fabric, so the seam blends with the fabric.
Does Overlocking stop fraying?
Use a Serger
Raw edges can stop fraying with the use of a serger. … Some regular sewing machines may have an overlock edge foot and stitch function which gives a result that looks very similar to that produced by a serger.
Do you need to overlock seams?
You don’t need a serger in order to sew beautiful things. Finishing seams without a serger can make any garment or home decor project have a finished look and last a lifetime.
What is the difference between overlock and serger?
A serger and an overlocker are different names for the same machine. … A serger performs an overlocking stitch, which is really more like knitting than sewing. Overlocking, or serging, trims and binds seams so that the fabric can not unravel. It professionally finishes the insides of garments.
Why do I need a serger?
1. Why do I need a serger for garment sewing? First and foremost, a serger is the ideal way to create a clean edge on any seam. Not only does the cutting blade trim the fabric edge, but the upper and lower looper threads wrap around the fabric edge, securing or protecting the fabric edge.
Are French seams stronger?
A french seam is a meticulously sewing technique where the garment seam is folded on itself and doubled. This double folding makes the seam much stronger and it tends to last longer than regular seams.
What are flat felled seams used for?
It is useful for keeping seam allowances flat and covering raw edges. The flat-felled seam is the type of seam used in making denim jeans, although it appears inside-out to reduce stitching. It is also used in traditional tipi construction.
What is the difference between a french seam and a flat felled seam?
A flat felled seam shows stitching on the right side (think of the seams on the side of a pair of jeans), while a french seam does not (it is found in many high end sheer garments). … Sew the two pieces of fabric, right sides together, with a 5/8″ seam.
Will a zigzag stitch prevent fraying?
A zigzag seam finish can be used on almost any seam to enclose the raw edge and prevent fraying if you have the option of sewing a zigzag stitch with your sewing machine.
Do you sew before you Serge?
Sew first, then serge: I think this would be a good place to start if you’re a serger noob. A serger does take some adjustment when sewing. Because the machine cuts the seam allowance off as you sew, you’ve got a lot less room for error. I sew first when I’m assembling awkward seams.
Can you make clothes without an overlocker?
You can use alternative seam finishing techniques that will finish garments neatly without an overlocker. You can use French seams or flat fell seams or even a simple zig zag stitch. Overlockers are not used in couture garments, in fact many seams are left raw.
Can you overlock on a normal sewing machine?
Overlocking on your sewing machine
You can buy an overlocking foot here. Line your fabric edge up against the guide and select either an over-edge stitch or a wide zigzag stitch. … This protects the raw edge of the fabric to stop it from fraying or unravelling.
Should you overlock before or after sewing?
You can use the overlocker to finish the seams together after constructing your garment but before doing any topstitching. You’ll want to try on the garment and make sure the fit is spot on before finishing the seams in this way.