What is the function of the spool pin on a sewing machine?

The horizontal spool pin is where the spool is placed. The upper thread guide, which guides the thread from the spool down to the needle, is on top of the machine by the spool thread. Most thread guides have symbols printed on the machine that show you where to place the thread.

What is the function of spool pin?

Spool Pin: The Spool pin holds the spool of thread. It can be horizontal or vertical in place. Hand Wheel: It is used to manually raise and lower the needle.

What is a spool on a sewing machine?

A spool holds a thread somewhere on the top or side of a machine. That thread is fed through a series of loops and into the eye of the needle. As mentioned in the introduction, the purpose of the bobbin is to hold the thread that is held below the needle.

What is a spool pin felt on a sewing machine?

The felt discs on the spool pins contribute to the free and even flow of thread from the spool and always should be under the spool. The vertical spool will spin smoother and easier with them in place and they protect the surface of the machine from wear.

IT IS INTERESTING:  Why do you think the Philippine embroidery industry is well known all over the world?

Where do you place the spool of thread?

Place your spool of thread on the top of the sewing machine, on the spool pin. The spool should be turned so that the thread will be released counter-clockwise. Check the top of your machine for a diagram before you place your thread spool.

What’s a spool?

1 : a cylindrical device which has a rim or ridge at each end and an axial hole for a pin or spindle and on which material (such as thread, wire, or tape) is wound. 2 : material or the amount of material wound on a spool. spool. verb. spooled; spooling; spools.

What is the difference between a spool and a bobbin?

As nouns the difference between spool and bobbin

is that spool is a device around which thread, wire or cable is wound, especially a cylinder or spindle or spool can be a small swimming pool that can be used also as a spa while bobbin is a spool or cylinder around which wire is coiled.

What holds the spool of thread?

Bobbin – The spool that sits in the lower part of the machine. It holds the thread that makes the underside of a stitch.

How do I choose a spool pin?

Picking a Spool Pin

The answer is quite simple. All we have to do is very slightly lighten up on the pressure applied to the tension wrench and begin very gently pushing on the spool pin. As you push on the spool you will experience counter-rotation – this is good and means you are doing it right.

How do you use a spool pin cap?

Firmly hold the thread with a spool cap so that the thread does not turn too much. Make sure you use the correct size spool cap for the thread. If the spool cap is smaller the thread, tension may be incorrect. If you dont have a spool cap larger than the size of the thread, there is a slit in the thread spool.

IT IS INTERESTING:  Frequent question: How do you seal embroidered patches?