What is the meaning of bobbin case?

What is a bobbin case?

The bobbin case

Some domestic machines have a bobbin case that is permanently fixed into the sewing machine. The purpose of the bobbin case is to support the bobbin in the sewing machine so that the machine stitches can be formed.

Are all bobbin cases the same?

While they are technically interchangeable in most cases, it is recommended that you only use one or the other. The weight of the bobbin can affect your tension and the way the thread feeds. These are the most common bobbins, as they are used with removable and inset bobbin cases.

What is the bobbin holder called?

Usually made of plastic, bobbin holders are often called a spool case and are used to tension the bottom thread whilst sewing on a sewing machine.

How do you put a bobbin case into a sewing machine?

Raise presser foot.

  1. Turn hand wheel toward you until the needle is in its highest position.
  2. Open the hinged cover.
  3. Hold the bobbin case with one hand. Insert the bobbin so that the thread runs in a clockwise direction.
  4. Pull the thread through the slit and under the finger.
  5. Hold the bobbin case by the hinged latch.

Why does a sewing machine need a bobbin?

In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.

IT IS INTERESTING:  How can you tell the quality of yarn?

When should I replace my bobbin case?

As long as you take good care of your bobbin case, it will perform well. However, eventually, it will cease to sew smoothly and will need to be replaced. Sometimes people think they only need to replace certain parts of the bobbin case, like the tension spring or the tension screw.

What holds the bobbin case?

Bobbin spindle- holds the bobbin while it winds.

Why does the bobbin case pop out?

– Make sure you are using the correct bobbin for your machine. – Check that the thread was wound correctly on the bobbin. – Make sure the bobbin was properly inserted. … – Check to see if the bobbin case is scratched or has a burr on it.