Adjust the bobbin tension as well to fine-tune your stitches. Many times thread breaks simply because the tension settings are too tight for the thread. Starting from the “loose side of things” and tightening the tension produces better results than to try and work backwards from a “too tight” setting.
What weight thread should I use for free motion quilting?
Let’s kick things off by chatting about thread choice. Catherine suggests using a lightweight fine thread when free motion quilting. She prefers a 50 weight cotton thread because it has enough strength that it won’t break while sewing and it’s easy to keep the right tension so your stitches are even.
Do you Backstitch when free motion quilting?
Don’t backstitch. Don’t overlock…you get the idea! We don’t build up thread at the end for the same reason we don’t build up thread at the beginning. When you finish a line of quilting just stop, rotate your handwheel to bring your needle all the way up, lift your foot, and pull the block off your machine.
Is gutermann thread good for quilting?
Gutermann Machine Quilting Thread is fine 50 weight 100% Cotton Thread but strong with a silky luster and is ideal for artists who prefer to sew with cotton. Gutermann Machine Quilting Thread is suitable for machine sewing, and perfect for long arm machine quilting.
Why does my top thread keep breaking while machine quilting?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.
What should my thread tension be?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
How do you prevent eyelashes in free motion quilting?
Move your quilting machine or fabric more slowly so you don’t flex the needle as much. If you get “eyelashes” on your quilt around the curves (Photo B), you’re moving too fast for the needle to keep up. Your tension setting will also have an effect, but eyelashes are generally caused by rapid movement and needle flex.
Where do you start free motion quilting on a quilt?
Start with the center-most diagonal line and free motion quilt. Flip the quilt 180 degrees and stitch the center-most diagonal line. These two lines of stitching form an “X”. See “How to Machine Quilt” for more information on quilting diagonal lines.
Why is Aurifil thread so expensive?
They explained why Aurifil thread is so expensive. They said, “the answer is…..it’s actually not! 1 large spool of Aurifil (1300 Meters) is the exact same length as 2 large (500 Meters each) and 3 small (100 Meters each) spools of our “less expensive” thread.” … SHOP ALL AURIFIL THREADS HERE!
Is it OK to quilt with polyester thread?
The short answer is no, polyester thread is safe to quilt with and won’t damage your fabric. However, this question is raised because polyester from many decades ago used to do this, which is why some quilters prefer to use cotton.
What is the best thread weight for machine quilting?
For most quilting on a home machine, a 40-weight cotton thread is an excellent choice. Because the 40 weight cotton thread is heavier than the finer 50 weight cotton thread, quilting stitches will show up more easily on the quilt.