Why is my needle hitting my bobbin case?

This usually happens if the bobbin case is not placed correctly. After cleaning your sewing machine, you may fail to put back the bobbin case into its original alignment. … Another reason why the needle hits the bobbin case could be the timing is off. This means that your sewing machine is not synchronized.

Why is my needle hitting the bottom?

The needle is not fitted properly in your machine. 2. The needle clamp screw is loose. Firmly tighten the needle set screw.

Why is my sewing machine needle hitting the footplate?

There are several reasons why the needle keeps hitting the presser foot/needle plate: … The presser foot you are using may not be appropriate for the type of stitch that you want to sew. – Attach the presser foot that is correct for they type of stitch that you want to sew.

Why is my bobbin case jumping?

– Make sure you are using the correct bobbin for your machine. – Check that the thread was wound correctly on the bobbin. – Make sure the bobbin was properly inserted. … – Check to see if the bobbin case is scratched or has a burr on it.

IT IS INTERESTING:  What kind of yarn is shiny?

What holds the bobbin case?

Bobbin spindle- holds the bobbin while it winds.

Why does my sewing machine needle keep breaking?

There could be several reasons why the needle keeps breaking. Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible. The needle could have been damaged or bent. … The combination of needle size, thread size and fabric is incorrect.

What is bobbin case?

What is a Bobbin Case? As the name implies, a bobbin case is the part of the machine that holds your bobbin when you are sewing.

Why is my needle hitting the presser foot Janome?

If you have particularly thick materials that you are sewing together, the needle could hit the presser foot if it’s all the way to one side or the other and the presser foot isn’t level.

Why is my sewing machine needle not centered?

To center your needle, your needle position dial needs to be set to center position and your stitch width dial needs to be set to “0”. The needle position dial will not function unless the width dial is on “0”.

When should I replace my bobbin case?

As long as you take good care of your bobbin case, it will perform well. However, eventually, it will cease to sew smoothly and will need to be replaced. Sometimes people think they only need to replace certain parts of the bobbin case, like the tension spring or the tension screw.

IT IS INTERESTING:  Best answer: How do you wash macrame?