If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.
What are the possible troubles encountered in winding the bobbin?
If the thread gets caught or tangled while you are winding the bobbin, the bobbin could be wound unevenly. When winding the bobbin, feed the thread through the winding tension disks so the thread has proper tension and the threads lie next to each other.
Why is my thread looping underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. … In this case, it might be necessary to loosen both the bobbin tension AND the top tension.
What is the function of bobbin winder?
When To Use: Bobbin winders, whether built into the machine or a portable machine, help to wind the thread on the bobbin and help to distribute the bobbin thread evenly so that it will be compatible with the tension of the top sewing machine thread.
Why does my bobbin case keep moving?
There could be several reasons why the bobbin is jumping in the bobbin case. … The thread was not wound properly on the bobbin. Wind the bobbin thread properly.
Why does my bobbin keep getting jammed?
Make sure your bobbin thread is wound evenly on the bobbin. If the thread is wound uneven make sure the bobbin thread is through the bobbin thread winding thread guide when you start to wind your bobbin. … If the bobbin case has been inserted incorrectly into the outer rotary hook your machine will jam.
Why does my thread keeps wrapping around my bobbin?
Some of the main reasons your thread could be wrapping around the bobbin include lack of proper maintenance, causing a buildup of lint and debris, improperly threading the machine, using the wrong needle, or using a different thread weight that is not recommended.
Is bobbin supposed to spin?
Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. … Pull the thread through the slot (A) and then to the left.
Probable Causes: – Top or bobbin thread is not set correctly. – Make sure that the bobbin was threaded properly in the shuttle race. …
What causes bird nesting in sewing?
Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, and uneven tension. This is typically caused by the tension balance being out of whack or the top thread is not threaded correctly.