Make chic curtain tie-backs with inexpensive materials from the hardware store, like jute rope, cotton rope and metal chain.
Can you use Command Strips for curtain tie backs?
First, stick the command hook on your wall beside your curtain. Then, if you’re using a ribbon, tie little loops on both ends of your ribbon. … Now hang one loop on your command hook, wrap it around your curtain, and put the other loop on the hook.
How do you make Velcro curtain tie backs?
Cut 8 pieces of firm velcro and 8 pieces of soft velcro–all 1 1/2 inches long. Lay out your strips and press the adhesive side onto the end of each, about 1/2 inch from the end. Flip them over and do the same thing on the opposite side (so one side of the tie back has the soft side of vecro on front and back).
How do you make magnetic curtain tie backs?
Fist cut 2 pieces of ribbon about 10″ long. Using a glue gun, glue one end of the ribbon to the back of the large button and the other end to the back of the smaller button. Then glue the magnets on top of the ribbon, pressing them together firmly until the glue is set.
How do you knot curtains?
Hold the middle portion of the curtain with 1 hand, then use your opposite hand to hold the outer edge of the curtain fabric. Wrap this thin portion of fabric behind the rest of the bunched fabric, then loop it back around the front. You’ll only be wrapping 1 layer of fabric around the curtains to create the knot.
How long should drapery tiebacks be?
Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.